Water-Jet Cutting
Waterjet cutting is an ideal method for shaping Nutec fibre-cement products. It ensures precise and accurate cuts while maintaining the material’s inherent strength and quality. This cutting technique opens up a world of design possibilities, from simple lattice patterns to sophisticated façade solar screens.
Key Features
Limitless Design Possibilities
Virtually any design can be replicated with waterjet cutting. However, it is essential to consult with Everite during the design phase to ensure that your specific pattern, installation method (framed or frameless), and fixing points are feasible.
ALL INDOOR USE
9 mm thick MD to be used as minimum thickness No more than 70% of the board can be cut away, with a minimum 20mm of fibre cement material between cuts. Board to be coated all sides with high quality plaster primer or waterproofing paint before fixing. Pilot holes to be drilled before fixing, hole to be 2mm larger in diameter than the screw. Medium Duty Application (6 m – 15 m high Usage) 12mm thick HD board to be used No more than 40% of the board can be cut away, with a minimum 30mm of fibre cement material between cuts. Board to be coated all sides with high quality plaster primer or waterproofing paint before fixing Pilot holes to be drilled before fixing, hole to be 2mm larger in diameter than the screw. Heavy Duty Application (Above 15m high Usage) 15mm HD board to be used No more than 30% of the board can be cut away There must be minimum 50mm of fibre cement material between cuts. Board to be coated all sides with high quality plaster primer or waterproofing paint before fixing Pilot holes to be drilled before fixing, hole to be 2mm larger in diameter than the screwcracking of the boards). All corners must have a minimum 5 mm radius built into the design, we cannot have sharp corners.